Moldplus Crash on Solid Parts

Owned by Reza Motamedi (Deactivated)
Last updated: May 01, 2017
1 min read

Problem

Moldplus crashes on solid parts.


Solution

There are two solutions:

    1. ing Moldplus 10.8 or prior
      Download the attached Moldplus packages for Mastercam X9 and 2017 and copy and paste them in the address shown below:

      C:\Users\reza.motamedi\Documents\MoldplusPackages

    2. Converting solid part into surfaces using Mastercam and not Moldplus convertor

  File Modified

PNG File Surface from solid.png

May 01, 2017 by Reza Motamedi

ZIP Archive Moldplus__10,8,0,13__M2017__x64.zip

May 01, 2017 by Reza Motamedi

ZIP Archive Moldplus__10,8,0,13__MX9__x64.zip

May 01, 2017 by Reza Motamedi