Height Sensing parameters
- Miguel Morales Gonzalez
Sensing type
Selects the type of ohmic sensing to be used in the operation
No ohmic sensing will be used in the operation
One-dimensional ohmic search will be used for arc transfer/pierce/cut height compensation
Touch along path
Initial height sensing (IHS)
If “Sensing type” is selected accordingly - allows user to define a one-dimensional ohmic search for arc transfer/pierce height/cut height compensation
One-dimensional ohmic search will be performed on all cuts in the operation
One-dimensional ohmic search will be performed on first cut of each single- and multi-cut (beveled holes etc.) feature
One-dimensional ohmic search will be performed on the first cut only
Touch along path
Selects how touch along path sensing will be used in the operation
All cuts
First cut of each feature
Add an extra touch before the lead-in
Adds an extra touch before lean-in
Touch mode
Fixed number
Distance
Distance between touches
Defines distance between touches
Number of touches
Defines number of touches
Auto adjust
Align at start
Align at end
Transition height
Transition speed
Touch search height
Touch speed
Touch direction
Normal to surface
Along feature orientation
Along selected vector