Height Sensing parameters

Sensing type

Selects the type of ohmic sensing to be used in the operation

• No ohmic sensing will be used in the operation

  Open

  

• One-dimensional ohmic search will be used for arc transfer/pierce/cut height compensation

  Open

  

• Touch along path

Initial height sensing (IHS)

If “Sensing type” is selected accordingly - allows user to define a one-dimensional ohmic search for arc transfer/pierce height/cut height compensation

• One-dimensional ohmic search will be performed on all cuts in the operation

• One-dimensional ohmic search will be performed on first cut of each single- and multi-cut (beveled holes etc.) feature

• One-dimensional ohmic search will be performed on the first cut only

Touch along path

Selects how touch along path sensing will be used in the operation

• All cuts

• First cut of each feature

Add an extra touch before the lead-in

Adds an extra touch before lean-in

Touch mode

• Fixed number

• Distance

Distance between touches

Defines distance between touches

Number of touches

Defines number of touches

Auto adjust

Align at start

Align at end

Transition height

Transition speed

Touch search height

Touch speed

Touch direction

• Normal to surface

• Along feature orientation

• Along selected vector