Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Current »

Problem

Moldplus crashes on solid parts.


Solution

There are two solutions:

    1. ing Moldplus 10.8 or prior
      Download the attached Moldplus packages for Mastercam X9 and 2017 and copy and paste them in the address shown below:

      C:\Users\reza.motamedi\Documents\MoldplusPackages

    2. Converting solid part into surfaces using Mastercam and not Moldplus convertor

  File Modified
No files shared here yet.


  • No labels