Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Problem

The robot goes back to home position between operations.

This is because the operations have different NC names and Robotmaster consider every operations with different NC names as different programs. Robotmaster will also output a file for every operations that have a different name. 

Solution

  1. In Mastercam, right click on the operation(s)
  2. Go to Edit selected operations / Change NC file name...
  3. Input the same name for every operations you want to output on the same program.

Filter by label

There are no items with the selected labels at this time.

  • No labels