Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

This article contains installation instructions for
Mastercam, Robotmaster, Moldplus, Aplus, and Moduleworks Laser Aided MFG. (LAM)


Mastercam must be installed before any other modules


Expand
titleMastercam
  1. Download Mastercam (Note: Request access here)

  2. Install Mastercam by double clicking on the installer and following the instructions
  3. Activate the Mastercam license:

    • If you were given a USB dongle (HASP), plug it into a USB slot and run the *.hcode file that was provided to you.

      Info
      iconfalse

      Note: If you encounter the error: "HASP not found", please refer to this article


    • If you were given an activation code & license number a popup should occur when you try to open Mastercam for the first time asking you to activate the license online. Also refer to this article, How to install a temporary Mastercam license

    • If you have a NetHasp please refer to How to setup a Network License for Mastercam and Moldplus

      Info
      titleAdditional Mastercam License Info

      Check out this PDF for additional Mastercam administration and license information

      View file
      nameMC-2020-Administrator-Guide.pd.pdf
      height250


  4. Update Mastercam by running the Mastercam updater
    1. File > Help > Check for Updates

Mastercam must be opened at least once before proceeding with the Robotmaster Installation

Expand
titleRobotmaster V6


Note

The user must have administrator rights to install robotmaster or any other Mastercam modules

In order to check if you have administrator rights

  • Type account into the Windows 10 search bar
  • Click Add, edit, or remove other users
  • Your account should be listed and Administrator should be below it


  1. It is important to backup your Robotmaster shared files before downloading and installing the update. For further instructions on how to back-up your files, refer to How-to back-up my Robotmaster V6 files.
  2. Remove any previously installed versions of Robotmaster between V6.2 - 6.8.
  3. Remove any installed versions of the Robotmaster toolkit.
  4. Download RobotmasterNote: Request access here
  5. If you have an older version of Robotmaster installed, uninstall it before proceeding.
    • Make sure that you backed-up your shared files by saving a copy of the the Robotmaster_V6 folder and its content located in C:\Users\Public\Documents\shared McamX
    • If you have questions regarding backing up your shared files, contact your Robotmaster reseller

  6. Install Robotmaster. Make sure that you select the appropriate Mastercam adapters during the installation process.

  7. To activate the Robotmaster license double click the rmlic file that was provided to you.  Note: The Rmlic file must be executed on the computer that will use Robotmaster.

  8. To access Robotmaster you must manually add the Robotmaster icon into the Mastercam ribbon

Spray Module

The license for Robotmaster V6 Spray module usually looks like the screenshot below - 

To activate it, first make sure Robotmaster is installed. Then you must access the link from the computer that has robotmaster installed


Warning
titlePost processor

Post processors from 6.0 and older are not compatible with 6.9. An update is required if it has been customized (please contact your distributor for any questions).

Post processors from 6.1 to 6.8 are compatible with 6.9 on and X9, but require a quick update to fully support Mastercam, 2017, 2018, 2019, 2020, and 2021 (Advanced Multiaxis - see this document: What's new & Downloads).




Expand
titleMoldplus
  1. Sign in with your Moldplus credentials : Moldplus download page. (Note: Request access here)
  2. Download the latest Moldplus for the appropriate Mastercam version

  3. Run the installation

  4. To register your license, open Mastercam and go to Moldplus / About:


  5. Select Register and look for the xml license that was provided to you by our team.

Note

If you are using Moldplus with a server license (Wibu or Nethasp) refer to this page: How to setup a Network License for Mastercam and Moldplus




Expand
titleAplus
  1. Download the Aplus installer. (Note: Request access here)
  2. Place the CAMU.spcf file (provided by your resller) into the following directory C:\Users\Public\Documents\shared Mcam20XX   
        If you have a Mastercam version newer than 2019, the path will look like this  C:\Users\Public\Documents\Shared Mastercam 20XX
       
    If you have a Mastercam version newer than 2021, the license format should be
    CAMU.mclf
  3.  Run the installer
Note

If you are using Aplus with a network/server license (NetHasp) refer to this page: How to setup an APlus (A+) server for use with a NetHasp




Expand
titleModuleworks Laser Aided Manufacturing (LAM)
  1. Download the LAM installer. (Note: Request access here

    Info
    titleMastercam & LAM Compatibility

    A ModuleWorks LAM installer is only compatible with one Mastercam version. The version is usually in the name of the executable (e.g. setup_mw5axCustomApps_MCAM2019_874271.exe


  2. Add the ModuleWorks icon called mw5axCustomApps Laser aided manufacturing to the Mastercam Toolbar/Ribbon. (Note: Refer to this article on how to customize the Mastercam ribbon) 
    Mcam2019


Info
iconfalse
titleLAM License File extension

A LAM license has the following file extension: mw5xca_lic (eg. LAM_License.m5xca_lic)


Expand
titleI already have a LAM license
  • Click on the LAM icon that you added to the ribbon and click on the Load license file button


Expand
titleI do not have a LAM license

I do not have a LAM license

Create and send a license request file (.mw5xca_lrq) to orders@robotmaster.com (Up to 2-3 days of delay).
See Below for instructions on how to create a LAM license request

How to create a LAM license request

  • Click on the  "mw5axCustomApps Laser aided manufacturing" icon in Mastercam (the icon you added to the ribbon).

If you don't have a license, the software will allow you to create a license request file. (See below for steps to create a LAM license Request file)
Image Modified


Info
titleLAM License Request Reminder

The license request file must be created on the PC intended to be used with Robotmaster

Image Modified

Fill in the fields with the following information..

  • Company Name: Robotmaster
  • Username: The name of your company (Note: this field should be filled with the name of the company that is purchasing LAM)
  • The Comments text box should contain the following → 
    Product type

  • : LAM
    License type

TEMPORARY
  • : TEMPORARY (If it is a permanent license fill in Permanent)
    Expiry date:
October 6, 2020 (Note: This date is provided by Robotmaster
  • (The expiry date should be 30 days ahead of your scheduled training date) (If it is a permanent license, leave this field blank)
    Hardware: PC Name (i.e. the name of your PC, usually found in system settings)

After filling in the proper fields

  1. Click on Save Request in the bottom right, and name it something like 'CompanyA_License_Request' (**Make sure to include your name and company name in the file name)
  2. After completing this procedure, Moduleworks LAM will generate a file that has the extension .mw5xca_lrq (e.g. LAM_License_Request.mw5xca_lrq)
  3. Once the “License Request File” is saved, please forward it to orders@robotmaster.com to generate the codes. Please note it could take up to 3 business days to get the LAM license.



Filter by label (Content by label)
showLabelsfalse
max4
spacesKB
showSpacefalse
sortmodified
reversetrue
typepage
cqllabel in ( "installation" , "install" , "license" ) and type = "page"
labelsinstallation robotmaster

Page Properties
hiddentrue


Related issues