Notes:
For robotic plasma cutting, tools are defined and loaded for each cut height that will be used.
Refrerence document for Tool & Speed parameter page specific to Plasma Cutting.
Selected tool naming elicitation
Short explanation regarding the impossibility of selecting the user tool (auto-generated by the module based on cut chart entry selected)
Parameter descriptions
Create excerpt for plasma cutting tool and speed
Create standard page
Insert excerpt from plasma cutting into standard page.
Selected tool
Tool is automatically selected based on the Hypertherm Cut Chart record in use. You can select a different tool for an operation, if needed.
Tool naming convention for plasma cutting
130A Hypertherm MS - D2.3 H6.6
{current in A} Hypertherm {material type} {depth in mm} {cut height in mm}
Inactive settings:
Linear speed
Set speed from selected tool
Approach speeds
Linear speed
Retract speeds
Linear speed
Entry/exit speeds
Entry linear speed
Exit linear speed