Notes:
For robotic plasma cutting, tools are defined and loaded for each cut height that will be used.
Refrerence document for Tool & Speed parameter page specific to Plasma Cutting.
Selected tool naming elicitation
Short explanation regarding the impossibility of selecting the user tool (auto-generated by the module based on cut chart entry selected)
Parameter descriptions
Selected tool
Tool is automatically selected based on the Hypertherm Cut Chart record in use. You can select a different tool for an operation, if needed.
Tool naming convention for plasma cutting
130A Hypertherm MS - D2.3 H6.6
{current in A} Hypertherm {material type} {depth in mm} {cut height in mm}
Inactive settings:
Linear speed
Set speed from selected tool
Approach speeds
Linear speed
Retract speeds
Linear speed
Entry/exit speeds
Entry linear speed
Exit linear speed