...
In the Edit tool interface, select the
button next to Holder to add a new segment.
The created holder segment has three dimensions. In order from left to right, they are the upper diameter, lower diameter and height of the segment.
Note when these values are updated, the 3D model Preview of the tool at the bottom of the pane updates to match.
Additional holder segments can be added to the bottom of the holder, and will automatically start with the lower diameter of the segment created above it.
Adjust drilling tool parameters
...
Set tool parameters as needed. Some properties to set include:
Tool number is used by default in the TCP manager, so should ideally match the tool number we use in real life.
Tool name and Tool description do not affect our program and are just used for reference, especially when the list of tools is long.
Diameter and Length are important for visualizing tool size when applying a drilling operation and for applying TCP at the end of the tool.
For a complete description of tool parameters, see Drilling tool parameters.
Select OK at the top of the tool editor interface.
...