When opened the point list will be set to display nothing with No robot selected. A robot can be selected using the Part Top Selection dropdown at the top of the display window on the right side of the Device tab. The active selection will still be shown in the dropdown, with a blue highlight.
The point in a point list that is active is marked with an arrow. When working with multiple robots, an arrow marker will also appear for any With multiple robots in use and operations assigned and calculated, the point list on the device side displays points for a program.
Focus modes and the point list
When the focus mode is on All Programs or Program, the program name is listed at the top of the point list and the first robot in the program is selected by default. The point list will display points for this robot.
You can view points for a different robot in the program by selecting the robot at the top of the point list.
When the focus is on a specific robot with Robot Program mode, the point list will show points for the that robot only.
Point marker
The active point in the point list is marked with an arrow.
When you select a different robot in the point list, the arrow marker will appear on the corresponding point that is being simultaneously activated by another robot, when that robot is selectedthe other robot. The markers are synchronized based on where in the simulation they are, in tandem with said simulation’s own markerthe playhead marker in the scheduler.