When a Hypertherm Cut Chart entry is selected for a plasma operation, a corresponding tool for that process is automatically created and assigned to the operation.
...
The naming convention for plasma cutting tools is:
{current in A} Hypertherm {material type} - D{kerf width in mm} H{cut height in mm}
For example, a plasma tool name for Mild Steel 130 Amp O2/Air with a Kerf Width (D) of 2.3 mm and Cut Height (H) of 6.6 mm would appear as:
...
Linear speed in mm/s on the entry or exit paths trajectories leading into or out from the base toolpath.
...