Notes:
For robotic plasma cutting, tools are defined and loaded for each cut height that will be used.
...
The naming convention for plasma cutting tools is:
{current in A} Hypertherm {material type} - {kerf diameter in mm} {cut height in mm}
For example, a plasma tool name might appear as:
130A Hypertherm MS - D2.3 H6.6
In Robotmaster for plasma cutting, kerf width is used for tool diameter and cut height is used as tool length.
(img)
For plasma operations, Selected tool, Linear speed, and Set speed from selected tool cannot be edited on the Tool and Speeds page. This information is automatically set based on Cut chart entry.
...