Notes:
For robotic plasma cutting, tools are defined and loaded for each cut height that will be used.
...
The naming convention for plasma cutting tools is:
test
{current in A} Hypertherm {material type} - {kerf diameter in mm} {cut height in mm}
For example, a plasma tool name might for Mild Steel 130 Amp O2/Air with a Kerf diameter of 2.3 mm and Cut Height of 6.6 mm would appear as:
130A Hypertherm MS - D2.3 H6.6
In Robotmaster for plasma cutting, Kerf diameter (kerf width) is used for tool diameter and cut height is used as tool length.
...