Please see below the major new features and changes in Robotmaster 2025 . For complete documentation, please visit ADD LINK.
Table of Contents | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Plasma Cutting
Complete documentation in ADD LINK
Are we making this public? Needs to be double checked.
CAD Translator Updates
List of Interoperability updates
...
Products (Writers) | Versions Supported |
ACIS | R18 – 2024 1.0 |
CATIA V5 | V5 R15 – V5–6 R2024 |
IGES | 5.3 |
STEP | AP203, AP214, AP242 (Geometry Only) |
STL | N/A |
XCGM | R2012 – 2024 1.0 |
Enhancements / Fixed Bugs
ADD RM Issue ListRM-849 As a user, I wish to window-select my open curves for Curve Path creation for Plasma Marking
RM-851 Enable kerf correction without affecting the generated tool
RM-852 Make the manual touch direction reference frame visible
RM-853 Notify projection fails
RM-872 Wrong Default value in Plasma Cutting
RM-848 Wrong projection when using Curve Path if the curve is directly on the surface
RM-850 Negative path offset leads to path projection issues
RM-854 Holes on the dome not found by the algorithm