Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Projection

  • Disable
    Will not project

  • Automatic
    Tries three techniques below and picks one.

  • Stock
    Separate geometry has to be imported and labeled as stock. This is workpiece geometry body that is

  • Untrim
    Projecting onto healed surface; surface that has been trimmed will be healed. Works only with closed interior profiles.

  • Extension
    Extends current geometry out, as with exterior profiles

Compensation

Kerf compensation options.

  • No labels