Holder
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Tool parameters
Tool number
This is used by default in the TCP manager and should ideally match the tool number used in real life.
...
Set the Milling tool type to apply parameters to the tool.
Flat End Mill
Standard flat end mill.
Flat End Mill | Standard flat end mill. |
Ball End Mill
...
Flat End Mill
Standard flat end mill.
...
Ball End Mill
...
Chamfer Mill
Mill tool for adding chamfer to edges of workpiece.
...
Slot Mill
Mill with slotted flute section.
...
Radial Mill
Radial mill with optional corner radius.
...
Dovetail Mill
Flared mill bit.
...
Taper Mill
Tapered mill bit with pointed or flat bottom tip. Corner radius can be used.
...
Lollipop Mill
Mill bit with spherical end. Diameter of the fluted ball is set using overall tool diameter.
...
Bull End Mill
Mill with bullnose corner radius on end.
...
 | |
Ball End Mill | Ball end mills have a rounded tip and uniform tool diameter. |
 | |
Chamfer Mill | Mill tool for adding chamfer to edges of workpiece. |
 | |
Slot Mill | Mill with slotted flute section. |
 | |
Radial Mill | Radial mill with optional corner radius. |
 | |
Dovetail Mill | Flared mill bit. |
 |
Taper |
Mill | Tapered mill bit with pointed or flat bottom tip. Corner radius can be used. |
 | |
Lollipop Mill | Mill |
tool with spherical end. Diameter of the fluted ball is set using overall tool diameter. |
 | |
Bull End Mill | Mill tool with bullnose corner radius on end. |
 | |
Engraving Mill | Tapered mill tool with pointed or flat-bottom tip. |
 | |
Barrel Mill | Mill tool with an elongated bulb-shaped fluted section. Use Diameter, Flute Length, and Barrel Radius to model the cutting section of the tool.  |
Milling tool dimensions
...
Diameter
...
Length
Exposed length of the drill milling tool from tip to end. Any portion of the tool seated in a drill chuck or tool holder should not be included in the length.
...
Length of the fluted cutting section of the drill bittool. The fluted section is indicated in yellow in the Preview and the viewport.
...
Length of the fluted section plusthe smooth section of the drill milling tool. The smooth section of the tool has the same diameter as the fluted section.
...
For Barrel Mill tools, Barrel radius is used with Diameter and Flute Length length to model tool shape. The barrel section is fit onto the available Flute length.
...
When defining tool geometry, keep in mind that cell collision detection can be refined such that the flute, arbor, and holder are treated separately for collisions. If the flute is excluded from the collision group for a workpiece, it will allow the flute to come into contact with the workpiece without causing a collision in Robotmaster.
Speeds
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|