...
As you edit welding parameters on the left, hover with the mouse cursor over the workpiece in the viewport to see a preview of the weld path.
...
Once you click in the viewport to apply the weld path, welding parameters can’t be changed for that pathChanging welding parameters does not affect already created weld paths. If you need to change the welding parameters on an existing path, delete and recreate the path from the list and start over.
Welding parameters
Selection filter
...
When enabled, this looks for obstacles that are tangent to the tool vector (normal to the weld path). If an obstacle is detected, the weld path will be trimmed so that it doesn’t go past the obstacle.
...
When Tacking mode is set to Distance, this option is active.
When enabled, Weld tack length is included in the Distance between tacks. This results in shorter spacing and more tack welds on the path.
...
When cleared, Distance between tacks is measured between the end of one tack weld to the start of the next tack weld, excluding the Weld tack length. This results longer spacing and fewer tack welds on the path.
...
Align at start
Place first tack weld at the start of the path.
...