...
For example, AirPro EFX Air Spray 1 mm Nozzle SST200x100.
Spraying parameters
Nozzle diameter
...
This sets how far the spray can reach and still effectively cover the workpiece. The max Max effective distance must be larger than the distance to part.
If a spraying operation path results in the spray tool exceeding the Max effective distance, in the spray simulation, spray material will not be deposited on the workpiece in that area. This can help to visualize the limits of spray deposition.
Spray rate
The accumulation deposition rate of spray deposition material on the surface in mm/min. A rate of 1 means that the thickness of deposited material would go from 0 to 1 mm in one minute when the tool is stationary.How to correlate this to cc/min?
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
Select a color for spraying. This is the color that will be used in the Task area and in the Device area when simulating spraying in coverage mode.
...
The Preview shows a representation of the spray cone. You can left-click
...
and drag to inspect the spray cone.
...