Step-by-step guide
Installing the license on the Server
1) Your reseller will have provided you a link to register the license on a server. Click on the link and the following webpage will be displayed
2) Click on Activate Selected License Now
3) The transfer of the license will then start and a message will be displayed once the registration is complete
| Warning | ||
|---|---|---|
| ||
The license is bound to the PC and must be returned before formatting or doing any major hardware changes. This can be done by accessing the license with the same link the reseller provided. Then click on the Re-Host Licenses button. |
Configuration of the license server
1) Open CodeMeter from the Windows start menu
2) Click on the WebAdmin
3) The following web-page will be displayed
4) Select Configuration \ Server \ Server Access as displayed in the picture bellow
5) In the Server Access tab, Enable Network server and click on Apply
6) A notification will start blinking at the bottom of the page. To tell that the changes will take effect once CodeMeter is restarted
7) Open CodeMeter from the Windows start menu.
8) Select the Process Menu and click on Restart CodeMeter Service
Congratulations, you have completed the configuration of your license server.
Related articles
| Filter by label (Content by label) | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Page Properties | ||
|---|---|---|
| ||
|