...
This option can be used to enable apply multi-pass welding in a weld path. A series of weld passes will be applied on the path, according to the multipass options. For
Use Z up order
Go from root - wall - floor
OFF = go root - floor pass, then wall. This is in terms of the Z up direction
What determines wall v floor?
Different terminology:
root pass
fill passes
cap passWhen enabled, this sequence of passes relative to the walls will follow the Z up direction, starting with the root pass. On a T weld, this affects which wall pass is made first.
...
Keep same direction
When cleared, individual passes in a multi-pass weld path will alternate in direction. For example, if the first pass is done right to left, the next pass will be done left to right.
...
Specify the number of weld bead layers. This will have a direct effect
Pass offset
Offset in MM,
root pass, filler pass, cap pass.
what about the sequence
number will directly affect the number of weld passes that are made.
...
Pass offset
Linear distance (mm) along walls between individual weld passes.
...
Additional welding parameters which are brand specific can be entered in the post processor settings. This includes things like weaving, weave pattern, seam tracking, and so on.