| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
Viewport Toolbar
...
At the top of the Device side viewport is the upper menu, which contains a button for material deposition. Here, you can choose to Display material, or Clear material.
Override
Navigation
To navigate to the override, you start by selecting the wrench icon next to the associated operation. This will bring you to operation program settings. The “+” button display a dropdown list of overrides, from which you can select Material deposition.
...
Display material - toggles whether added material is displayed on the part.
Clear material - Removes previously added material from the part.
Setup
...
Material deposition contains 4 aspects that can be changed. Simulate deposition must be activated before these can be accessed.
...
The width of the simulated material can be changed to any numerical value up to 100 100mm using the text box.
...
Material thickness
The thickness can also be changed to any numerical value up to 100 100mm using the text box.
Material shape
...
The color of the simulated material can be changed using ARGB sliders.
Override
There is a Material deposition override to control the material deposition settings at a lower level.
To navigate to the override, you start by selecting the wrench icon next to the associated operation. This will bring you to operation program settings. The “+” button display a dropdown list of overrides, from which you can select Material deposition.
...