...
Adjust spraying tool parameters
Now that we have a holder, we need to adjust Adjust the remaining parameters of the milling spraying tool to match our the real life tool.
Set tool parameters as needed. Some properties to set include:
Tool number is used by default in the TCP manager, so should ideally match the tool number we use in real life.
Tool name and Tool description do not affect our program and are just used for reference, especially when the list of tools is long.
Nozzle diameter, Distance to part, X pattern value, Y pattern value, and Spray color are important for visualizing tool size when applying a spraying operation and for applying TCP at the end of the tool.
For a complete description of tool parameters, see Milling tool properties.
Select OK at the top of the tool editor interface.
...