...
Value of the transfer height in mm defined in selected Cut Chart entry. User editable.
...
Transfer height is the distance at which plasma torch nozzle is kept from the material surface while transferring the pilot arc to the material. Usually different from cut and/or piercing height, but may be the same value.
...
Value of the cut height in mm defined in selected Cut Chart entry. User editable.
...
Cut height is the distance at which plasma torch nozzle is kept from the material surface during the cut. Usually different from transfer and/or piercing height, but may be the same value.
...
Value of the angle adjustment in degrees. User defined.
...
The algorithm reprojects the path based on a user-input angle adjustment, at the desired angle and corrected height while respecting the integrity of the top edge of the cut. This is to correct future cuts based on previous cut tests. This is not to create 4bevel cuts from a non-bevel cut path generated from CAD. Desired bevel angles should be modeled in the CAD model.
...