- Make sure that the machine definition that you use for your process is loaded in Mastercam:
- Go to Settings / Machine definition manager...
- When the following prompt appears, select the checkmark:
- Select the Edit control definition icon
- Select Files, make sure the On fatal error is selected under Posting error file, save and click on check mark:
- Mastercam will ask if you save the definition, select Yes.
- On the machine definition manager window select the check mark again. Mastercam will ask if you to change the changes, select Yes again.
- Finally Mastercam will ask if you want to replace the machine group, select Yes.
|